Ecocut 600 LE Series
Neat cutting oils for deep hole drilling, chlorine-free, antimist plus LE Technology
The Ecocut 600 LE series of products are designed for gun drilling and other deep hole drilling, as well as milling, trepanning operations and other cutting operations on difficult-to-machine materials. The optimized heat transfer properties permit higher feed and cutting speeds. The abbreviation LE means "low evaporation" and stands for excellent antimist properties and low evaporation during use. Such oils contribute towards reducing environmental and workshop pollution.
Benefits of using Ecocut 600 LE Series
- Low evaporation technology
- Outstanding antimist properties
- Chlorine-free EP additives
- Enhanced tool life
- Excellent corrosion protection
- Good cooling and lubrication
Application:
Recommended for central systems and individually-filled machines. Can be used on all belt type filter systems for machine tools. Use as supplied.
Typical Physical & Chemical Characteristics
ECOCUT |
|
610 LE |
615 LE |
628 LE |
646 LE |
|
|
Properties |
Unit |
Value |
Value |
Value |
Value |
Norm Test |
|
Density at 15 °C |
Kg/l |
0.64 |
0.875 |
0.87 |
0.855 |
ASTM D 1298 |
|
Colour |
|
2.0 |
2.0 |
1.5 |
1.5 |
ASTM D 1500 |
|
Viscosity at 20 °C |
mm²/s |
22 |
35 |
69 |
128 |
ASTM D 445 |
|
Viscosity at 40 °C |
mm²/s |
10 |
15.5 |
28 |
46 |
ASTM D 445 |
|
Flash point COC |
°C |
160 |
200 |
210 |
140 |
ASTM D 92 |
|
Copper corrosion / 3 h - 20 °C |
degree of corr. |
4 a |
4 a |
4 a |
4 a |
ASTM D 130 |
|
Copper corrosion / 24 h - 20 °C |
degree of corr. |
4 b |
4 b |
4 b |
4 b |
ASTM D 130 |
|
Copper corrosion / 3 h - 50 °C |
degree of corr. |
4 c |
4 b |
4 c |
4 c |
ASTM D 130 |
|
Copper corrosion / 24 h - 50 °C |
degree of corr. |
4 c |
4 c |
4 c |
4 c |
ASTM D 130 |
|
Copper corrosion / 3 h - 100 °C |
degree of corr. |
4 c |
4 c |
4 c |
4 c |
ASTM D 130 |
|
Copper corrosion / 24 h - 100 °C |
degree of corr. |
4 c |
4 c |
4 c |
4 c |
ASTM D 130 |
|
Oil mist index |
|
3 |
3 |
2 |
2 |
FLP* |
|
Evaporation loss |
% |
46 |
24 |
14 |
8 |
DIN 51 581-1 | | 
