ANDEROL 1255
Synthetic Compressor Lubricant Product Data Sheet
ANDEROL 1255 is an ISO 320 ester based high-viscosity lubricant formulated
to provide high temperature and/or long-term crankcase and cylinder lubrication with
minimal deposits.
ANDEROL 1255 will be used for applications where a high viscosity is required.
ANDEROL synthetic lubricants are the only
long-life synthetic lubricants with over 60
years of successful performance.
· Wide operating temperature
· Long drain and maintenance intervals
· Lower oil consumption
· Very low vapour pressure
· High oxidation resistance
· Reduces fire and explosion hazard
· Eliminates lacquering and deposits
· Reduces energy consumption
Cylinder and crankcase lubrication for
Reciprocating Compressors and Vacuum
Pumps.
Compatible with following gasses:
Nominal Operating Range -10 °C to 230 °C
The following seals, paints and plastics are
recommended for use in contact with Anderol
Synthetic Lubricants.
Materials not recommended are also shown.
For more information on other materials see
our ‘Compatibility Guide’.
RECOMMENDED :
Viton, High Nitrile Buna N, Teflon, Epoxy Paint,
Oil-Resistant Alkyd, Nylon, Delrin, Celcon, PBT
NOT RECOMMENDED:
Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint,
Lacquer, Polystrene, PVC, ABS
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
APPROVALS / REGISTRATIONS
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
PROPERTIES TEST METHOD ANDEROL 1255
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Evaporation, 22 hrs @ 100 °C, %
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-972
Clear Yellow Liquid
293
21.1
84
0.94
0.5
265
-33
<1 |
