ANDEROL 7220 FG
H1 High Performance Food Grade Gear & Chain Lubricant Product Data Sheet
ANDEROL 7220 FG is a high performance product, designed primarily for industrial
worm gear applications in the food & beverage industry. It may also be considered as a
general purpose gear lubricant or to lubricate chains and ways.
This fluid is a synthetic Polyalkylene Glycol (PAG) based fluid that provides excellent
thermal and oxidative stability, load carrying ability and sludge-free operation over a
wide temperature range. The PAG base stock is enhanced with a special mixture of
additives
providing thermal oxidation stability and anti wear performance.
ANDEROL 7220 FG is NSF/H1 and InS/H1 registered.
ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR
178.3570.
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
Long life, fewer oil changes
High water tolerance
Very good heat dissipation
Improved thermal stability
Increased oxidative stability
Extends equipment life
High and low temperature
operations
Excellent corrosion inhibition
Reduced volatility
No sludge formation
ANDEROL 7220 FG is PAG based, therefore
thorough cleaning is recommended when
mixing with any other chemistries, such as
petroleum based (mineral oils) and/or PAO
(Polyalphaolefins).
When changing over from a conventional
mineral oil care should be taken to minimize
contamination caused by decomposition
material from the previous lubricant.
Thorough cleaning with an ester followed by a
light petroleum solvent is advisable.
Worm gears
Chains and ways, including high
water containing applications.
They can also be used in:
Low speed gear sets
Bearings
Circulation systems
Almost all gear sets requiring an
ISO 150 or 220 VG oil.
PROPERTIES TEST METHOD ANDEROL 7220 FG
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, COC, °C
Pour Point, °C
Four ball Wear,1200 rpm, 75°C, 40kg
Four Ball Weld, kg
Copper Corrosion
Steel corrosion, Sea water
FZG A/8.3/90 , failure load stage
Oxidation characteristics of extreme pressure
lubricant, 121°C, 312 HRS, numbers of precipitation
Air release at 75°C (min)
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-4172
ASTM D-2783
ASTM D-130
ASTM D665B
ISO 14635-1
ASTM 2893
ASTM D3427
Clear liquid
216.0
34.3
207
0.9996
1.57
274
- 42
0.32
200
1a
Pass
14
0
8.2 |
