ANDEROL 794
Synthetic Grease Product Data Sheet
ANDEROL 794 is a diester-based, NLGI number 1.5 grade grease that is formulated to
provide clean lubrication for fine instruments and equipment.
APPLICATIONS COMPATIBILITY ADVANTAGES
Fine Instruments
Watches, Clocks and Timing Devices
Precision Anti-friction Bearings
Office, Computing and Accounting
Extended lubrication cycles at all
temperatures
Wide temperature application -65° to 300° F
Resistant to oil bleed
The following seals, paints, and plastics are
recommended for use in contact with
ANDEROL synthetic lubricants.
Materials not recommended are also shown.
For more information on other materials, see
our “Compatibility Guide”.
RECOMMENDED:
Viton, High Nitrile Buna N, Teflon, Epoxy
Paint, Oil-Resistant Alkyd, Nylon, Delrin,
Celcon, PBT.
NOT RECOMMENDED:
Neoprene, SBR Rubber, Low Nitrile Buna N,
Acrylic Paint, Lacquer, Polystyrene, PVC,
ABS
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL 794
NLGI Number
Worked Penetration, mm
Worked Stability, 100,000 strokes, mm
Base Oil Viscosity @ 40° C, cSt
Base Oil Viscosity @100° C, cSt
Base Oil Viscosity Index (VI)
Dropping Point, ° C
Oil Separation, 30 hr. @ 100° C
Four-Ball War, 1200 rpm, 40kg, 1 hr, mm @ 75° C
Specific Gravity, 60 ° F (15.6° C)
Density, lbs/gallon
---
ASTM D-217
ASTM D-217
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-566
ASTM D-6184
ASTM D-2266
ASTM D-1480
ASTM D-1250
1.5
315
335
13.5
3.6
159
177
6.0
0.6
0.94
7.83 |
