ANDEROL PQ AA 0 PLUS
Food-Grade Grease NLGI-00 Product Data Sheet
ANDEROL PQ AA 0 PLUS is an aluminum complex thickened grease designed for use in
food processing machinery. It is a non-toxic, general-purpose grease and can satisfy a wide
variety of applications. It provides excellent anti-wear protection and prevent corrosion.
ANDEROL PQ AA 0 PLUS has good water resistance. This product is NSF registered as H1
for use in applications where incidental food contact can occur.
APPLICATIONS / ADVANTAGES REGISTRATIONS / APPROVAL HANDLING AND STORAGE
Lubrication of friction bearings even at high
temperatures and water exposure
General-purpose food grade grease
Lubrication of machinery in food and
beverage industry
Grease lubricated points in can seaming
and bottling
Excellent wear protection
Prevents Rusting
Good mechanical stability
ANDEROL PQ Food Grade lubricants are
approved, recommended and field tested by
many OEM’s in the food processing, bottling,
canning, meat processing, and pharmaceutical
industries.
ANDEROL and PQ Food Grade lubricants are
registered by NSF International (www.nsf.org)
and meets USDA 1998 Guidelines. ANDEROL
Food Grade lubricants also meet the
certification requirements recommended by the
National Lubricating Grease Institute (NLGI)
and the European Lubricating Grease Institute
(ELGI)
ANDEROL PQ Food Grade lubricants
generally present little hazard in normal
handling if ordinary care is exercised. If
spilled, cover with inert, absorbent material
and remove. Flush the area with water.
Although PQ Food Grade lubricants are not
highly flammable, they will burn and should
be kept away from open flames. In case of
fire, use water spray, foam, carbon dioxide, or
dry chemical.
PQ Food Grade lubricants should be stored
preferably in protected locations to prevent
contamination. Do not re-use drums; flush
and send to re-conditioner.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL PQ AA 0 PLUS
Thickener
Color
Type of Base Oil
Operating temperature for long-term lubrication
Short time admissible temperature peak value
Dropping Point
Worked Penetration
Base Oil Viscosity at 40° C
Water resistance
Corrosion Protection
4-Ball-test welding load
Designation
ASTM D-2265
ASTM D-217
ASTM D-445
DIN 51.807-01
IP 220/85
DIN 51.350
DIN 51.502
Al-complex
White
Med. White Oil (DAB10)
-20 to +140° C
+180° C
>250° C
355 to 385
160 mm²/s
0-90
Corrosion degree 0/1
3200 N
GP 0N-20 |
