CASTROL OPTIMOL PASTE PL

官方网站：http://www.castrol.com.ua/catalog/Optimol%20Paste%20PL%20Spray.pdf
Black assembly paste with MoS2
DESCRIPTION
OPTIMOL PASTE PL is especially suited for highly loaded sliding surfaces as well as for
base and thin-film lubrication at high pressures and temperatures.
For larger surfaces and lubricating points with difficult access such as bore holes, threads
and gear rims we recommend the use of OPTIMOL PASTE PL SPRAY.
APPLICATIONS
?For screw connections, press and snug fits at high temperatures up to + 600癈/+ 1112癋
?For sliding bearings, bushes and toothed wheels
?On drive trains in the automotive industry
?For base lubrication of slide ways, guides and joints
?For good separation of tool and work piece during hot shaping of metals
?Temperature application range: - 30癈/- 22癋 up to about + 450癈/+ 842癋 (in case of
reduced air supply up to + 600癈/+ 1112癋)
ADVANTAGES
?OPTITEC?- OPTIMOL technology
?wide range of applications
?immediate lubricating effect
?easy spray application
?economical in use
?thermally stable
?excellent emergency running properties due to especially selected solid lubricants
?maximum load carrying capacity
?extremely low coefficient of friction
?good corrosion protection
?prevents fretting corrosion
?good adhesion and separation
?prevents stick-slip
Product Data
Optimol Paste PL
20.10.2006
Castrol Optimol Paste PL and Castrol logo are trademarks of Castrol Limited, used under licence.
Die technischen Daten sind Durchschnittswerte, die jedoch innerhalb der festgelegten Spezifikation liegen.
Diese Angaben entsprechen umfangreichen Pr黤ungen und Praxiserfahrungen. Bei der Vielfalt der Anwendungen kann daraus keine Verbindlichkeit f黵 die
Bew鋒rung in jedem Einzelfall hergeleitet werden. Praxiserprobungen empfohlen. 膎derungen der Zusammensetzung bleiben Vorbehalten, gegebenenfalls
in Absprache mit dem Kunden.
Weitere Produkt-Informationen sind bei der Anwendungstechnik der Deutsche BP Aktiengesellschaft zu erfragen.
Deutsche BP AG ?Industrial Lubricants & Services, Erkelenzer Str. 20, 41179 M鰊chengladbach
Tel: +49 (0)2161 909-30 Fax: +49 (0)2161 909-481
www.castrol.com/industrial
Page 2 of 2
NOTES FOR USE
?Clean surface. Apply thin layer of OPTIMOL PASTE PL with a brush or a lint-free cloth.
Remove excess paste.
?Shake OPTIMOL PASTE PL SPRAY (article no. 08436) well before use. Hold can about
15 - 20 cm (6 to 8 inches) from lubricating point to apply thin and even layer of lubricant.
?Only for paste-specific applications - cannot replace oil or grease lubrication.
?Please avoid mixing with other pastes, greases or oils.
Technical data
Unit Value Test method
CASTROL OPTIMOL PASTE PL - - -
Article no. - 08410 -
Color - gray-black visual
Base
-
grease-like carrier/MoS2 and solid
lubricants with synergetic
effect/mineral oil
-
NLGI grade - 2 DIN 51818
Worked penetration 0.1 mm 265 - 295 DIN ISO 2137
Density at + 20癈/+ 68癋 kg/m?1500 DIN 51757
Base oil viscosity at + 40癈 mm?s 94.0 DIN 51562
Erichsen screw test
Total friction - 0.07 DIN 946