ANDEROL 555
Synthetic Compressor Lubricant Product Data Sheet
PROPERTIES TEST METHOD ANDEROL 555
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 82°C,min
Evaporation, 22 hrs @ 100°C, %
Sulphated ash
% CRC of 20% dest
Air release at 50°C (min.)
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
ASTM D-972
DIN 51575
DIN 51536
ASTM D-3427
Clear Yellow Liquid
93.5
9.1
61
0.957
0.05
250
-33
10
0.16
0.02
0.12
<1
ANDEROL 555 is an ISO 100 synthetic diester based compressor lubricant
specifically designed to provide long-term lubrication in air and process gas
compressors.
ANDEROL 555 meets or exceeds the following specifications:
BAM Recommended
DIN 51506 -VDL
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
No metal additives to interfere with catalytic
processes
● Fewer oil changes
● Reduces compressor maintenance
● Greatly reduces fire and explosion
hazard
● Separates water condensate rapidly
● Lower oil consumption
● Eliminates lacquering and deposits
reduces energy consumption
The following seals, paints and plastics are
recommended for use in contact with
Anderol synthetic lubricants. Materials not
recommended are also shown. For more
information on other materials see our
‘Compatibility Guide’.
RECOMMENDED:
Viton, High Nitrile Buna N, Teflon, Epoxy
Paint, Oil-Resistant Alkyd, Nylon, Delrin,
Celcon, PBT
NOT RECOMMENDED:
Neoprene, SBR Rubber, Low Nitrile Buna
N, Acrylic Paint, Lacquer, Polystyrene,
PVC, ABS
● Air
● Butadiene
● Carbon Monoxide
● Carbon Dioxide
(dry)
● Ethylene
● Helium
● Hydrogen
● Natural gas
● Methane
● Nitrogen
● Propane
Cylinder and crankcase lubrication for
reciprocating compressors, vane
compressors and vacuum pumps.
Nominal Operating Range -15°C to
210 °C
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY |
