ANDEROL 783-1
Synthetic Food Grade Grease NLG-1 Product Data Sheet
ANDEROL 783-1 is a synthetic hydrocarbon (PAO) based Aluminum complex
thickened grease designed for use in food processing machinery.
It is non-toxic, high quality general-purpose grease and can satisfy a wide
variety of applications, even under high temperatures, high loads and water
exposure.
ANDEROL 783-1 is NSF registered as H1 for use in applications where
incidental food contact can occur.
ADVANTAGES / APPLICATIONS REGISTRATIONS / APPROVAL HANDLING AND STORAGE
● Lubrication of roller and friction
bearings in food and beverage,
cosmetic and pharmaceutical industry
● High temperatures, high loads and
water exposure
● High quality general-purpose food
grade grease
● Excellent wear protection
● Prevent rusting
● Good mechanical stability
ANDEROL Lubricants are approved,
recommended and field tested by many OEM’s
in the food processing, bottling, canning, meat
processing, and pharmaceutical industries.
ANDEROL and PQ Food Grade lubricants are
registered by NSF International (www.nsf.org)
and meet USDA 1998 Guidelines. ANDEROL
Food Grade lubricants also meet the
certification requirements recommended by the
National Lubricating Grease Institute (NLGI)
and the European Lubricant Greasing Institute
(ELGI)
ANDEROL Lubricants generally present little
hazard in normal handling if ordinary care is
exercised. If spilled, cover with inert,
absorbent material and remove. Flush the
area with water.
Although ANDEROL lubricants are not
highly flammable, they will burn and should
be kept away from open flames. In case of
fire, use water spray, foam, carbon dioxide,
or dry chemical.
ANDEROL lubricants should be stored
preferably in protected locations to prevent
contamination. Do not re-use drums; flush
and send to re-conditioner.
PROPERTIES TEST METHOD ANDEROL 783-1
Thickener
Color
Type of Base Oil
Operating temperature for long-term lubrication
Short time admissible temperature peak value
Dropping Point
Worked Penetration
Base Oil Viscosity at 40°C
Water Resistance
Corrosion Protection
4 Ball-test welding load
Designation
Designation
ASTM D-2265
ASTM D-217
ASTM D-445
DIN 51.807-01
IP 220/85
DIN 51.350
DIN 51.502
ISO 6743
Al-complex
White
Synthetic (PAO)
-45 to + 160°C
+200°C
>250°C
310 to 340
350 mm²/S
0-90
Corrosion degree 0/0
2600 N
KPFHC 1 P-40
XEEHB |
