ANDEROL RCF-P 68FG
H1 High Performance Food Grade Compressor Lubricant Product Data Sheet
ANDEROL RCF P 68FG is a next generation synthetic compressor oil based on a mixture of
specially selected non-toxic synthetic polyalphaolefins combined with a high performance additive
technology.
ANDEROL RCF P 68FG meets the lubrication requirements of air compressors running in food
processing plants.
ANDEROL RCF P 68FG meets or exceeds DIN 51503 KAA 68.
ANDEROL RCF P 68FG is NSF/H1 and InS/H1 registered. The product is certified Kosher by the
Orthodox Union and Halal by the Islamic Food Council of Europe.
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
Fewer oil changes
Compatible with compressor seals,
gaskets, hoses and system components
Reduced varnish, lacquer and deposits
Less maintenance intervals
Lower oil consumption
Excellent anti-wear properties
Rust and oxidation inhibited
Good water separation
Ammonia compatible
ANDEROL synthetic hydrocarbon based
lubricants are similar to mineral oils in their
compatibility with paints, seals, gaskets and
hoses. No special precautions related to
compatibility are required when changing over
from a mineral oil lubricant to an ANDEROL
synthetic hydrocarbon based lubricant.
This product was tested and found compatible
to be used in ammonia systems.
Recommended for use in rotary-screw
compressors and other rotating equipment
applications where incidental food contact
may occur.
Nominal Operating Range is -35/-40°C to
170°C.
This product was especially designed to be
used in ammonia refrigeration applications
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL RCF-P 68FG
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, COC, °C
Pour Point, °C
Demulsibility @ 54°C, min
Visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
Clear colorless to light yellow liquid
65.6
10.1
139
0.839
0.04
266
-54
15 |
