|
Castrol Tribol 1060/68,Castrol Tribol1060/68 详细说明 （浏览923次） |
nstrate the performance necessary to operate as gear and hydraulic oils, thus making them
the lubricant of choice for the total machine tool.
Reciprocating way tables and machine tools must stop and start again at each change of direction. The oil film at
standstill is squeezed to a minimum thickness, allowing metal asperities (microscopic high spots) an opposing
surfaces to interlock, even if the oil film is not broken. If microscopic welds occur an impact, then erratic motion
called "stick-slip" occurs at the breakaway as the table reverses. This action, also called "chatter", manifests itself in
poor finish and even in loss of tolerance of the parts being machined. Castrol Tribol 1060 way oils demonstrate
outstanding resistance to stick-slip, showing excellent results in three different test procedures.
Equally important is the way oil's ability to separate from cutting fluid emulsions. The formation of stable emulsions
of the way oil in the cutting fluid compromises the film of lubricant and the slideway and also leads to contamination
of the cutting fluid in the tank and circulating system. Castrol Tribol 1060 way oils show excellent demulsification
characteristics, as demonstrated by the Schmidt demulsification test with 12 different, commercial cutting fluid
emulsions.
The high quality base oils in Castrol Tribol 1060 way oils have been selected for their ability to maintain strong film
integrity even under great pressure.
Additional compounding adds both adhesive and cohesive characteristics to these products.
Wear protection and resistance to stick-slip are provided by a carefully developed package of Performance
additives.
Castrol Tribol 1060 way oils are not corrosive to ferrous or non-ferrous metals. Rust and oxidation inhibiting
additives are present to afford rust protection and long life of the oil.
Application
Intended applications of Castrol Tribol 1060 way oils are in machine tools, including circulation systems primarily
for the lubrication of ways and slides.
Castrol Tribol 1060 way oils are also qualified for the lubrication of other machine tool components, including plain
and antifriction bearings, translating screws, gears such as are used in head stocks and speed change units, as
well as hydraulic systems.
Castrol Tribol 1060 way oils are widely used in general applications where a non-drip characteristic is desirable to
reduce oil loss or "fly-off" from cams, eccentrics, conveyors, press shaft bearings, or from machines, which from
long use or earlier wear conditions, have expanded clearances.
Application of Castrol Tribol 1060 way oils may be by oil can, oil cup, reservoir, or by circulation or dispensing
systems designed for way oils.
Castrol Tribol 1060 Range
Way Oils
Page 1 of 3 |
|
