| Castrol Alpha SP-C 150Industrial Gear OilDescriptionCastrol Alpha SP-C 150 range fulfils the requirements of GB 5903-2011 for CKD type gear oils.Alpha SP- C 150 offers excellent extreme pressure and anti-wear performance, with reduced friction and good waterseparation properties. In addition, the products behave neutral towards conventional seals and bearing metals.ApplicationSuitable for lubrication circulation or oil bath lubrication of medium-load enclosed spur and helical gears in majority ofindustrial applications.Aircol SP-C is classified as follows:L-CKD 150Meets requirements of GB 5903-2011AdvantagesExcellent extreme pressure and anti-wear performance.Reduced frictionGood water separation.Neutral towards conventional seals and bearing metalsPage: 1/2Typical CharacteristicsName Method Units Alpha SP-C 150Appearance GB/T 12579 - Clear & brightKinematic Viscosity @ 40°C GB/T 265 mm²/s 152Kinematic Viscosity @ 100°C GB/T 265 mm²/s 15.2Viscosity Index GB/T 1995 - 101Pour Point GB/T 3535 °C -36Foam Sequence I, Tendency/Stability GB/T 12579 ml / ml 0/0Flash Point - open cup method GB/T 3536 °C 272Copper corrosion (3 hrs@100°C) GB/T 5096 Rating 1aRust test - synthetic seaw ater (24 hrs) GB/T 11143 (Method B) Rating PassDemulsibility Characteristics of Extreme PressureLubricating Oil, Emulsion GB/T 8022 ml <0.1Four Ball Weld Load test - Weld Point ASTM D2783 kgf 250Four Ball Wear test - Wear Scar Diameter ( 20 kgf /54°C / 1800 rpm / 1 hr) ASTM D4172 mm 0.25FZG Gear Scuffing test - A/8.3/90 NB/SH/T 0306 Failure Load Stage 12Subject to usual manufacturing tolerances.Castrol Alpha SP-C 150Castrol, the Castrol logo and related marks are trademarks of Castrol Limited, used under licence.This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, ismade as to its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advisedto ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products safely, to assess suitability for theintended application and to comply with all applicable laws and regulations. Safety Data Sheets are available for all our products and should be consulted forappropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by either BP plc or its subsidiaries for anydamage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from hazards inherent in the nature of thematerial. All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if yourequire any further information.Castrol Industrial, Technology Centre , Whitchurch Hill , Pangbourne , Reading , RG8 7QR , United Kingdom |
