Mobil SHC™ Grease 102 WT

Mobil SHC™ Grease 102 WT

风力发电机高性能合成润滑脂

安全数据表 (MSDS)

产品数据表 (PDS)

美孚 SHC™ 润滑脂 102 WT 经科学研发而成，旨在极端低温下满足或超越风力发电机变桨和偏航应用的苛刻要求。该润滑脂兼具合成基础油与高品质复合锂基增稠剂的独特性能。先进的配方有助于适应极端低温应用，并且具有高温性能和卓越的结构稳定性与耐水性。

设备润滑油推荐
我们的美孚优释达℠产品选择器工具将帮您发现适用于具体设备的润滑油。

数据表

产品数据表 (PDS)

安全数据表 (MSDS)

特性和优点

• 基础油的低内部摩擦和高自然粘度指数可改善低温启动和运行扭矩，并且可在低至 -50ºC (-58ºF) 的温度下泵送。

• 与常规润滑脂相比，本产品具有优异的热稳定性和抗氧化性，有助于延长使用寿命和补脂周期。

• 与常规润滑脂相比，卓越的防锈和防腐蚀性能在潮湿环境中亦能发挥出色作用，从而减少停机时间和维护成本。

• 在有水的情况下仍具备出色的结构稳定性，有助于在不利的含水环境中保持润滑脂的稠度。

• 出众的泵送性为采用集中供脂系统或滑脂分配器的轴承提供可靠润滑。

• 与常规润滑脂相比，低牵引系数有助于提高机械使用寿命、降低能源成本。

应用

• 美孚 SHC 润滑脂 102 WT 符合大多数风力发电机制造商和零件供应商的规范，在偏航、变桨和发电机轴承（无论是采用手动润滑，还是使用集中供脂系统或滑脂配给器）的润滑方面表现出卓越的性能。

• 适用于在极端低温环境下工作的风力发电机。

• 推荐持续运行的温度范围为 -50ºC (-58ºF) 至 120ºC (248ºF)。

规范与认可

本产品已获得以下认可：

经国际海事组织(IMO) 测试和批准的材料兼容性

经ThyssenKrupp Rothe Erde 测试和批准的密封兼容性

本产品满足或超越以下要求：

DIN51825：2004-06 KPHC2K-50

特性与规范

特性

等级

NLGI 2

腐蚀，轴承，48 小时，52ºC，评级，ASTM D1743

通过

滴点，ºC，ASTM D2265

263

四球极压试验，焊接负荷，kgf，ASTM D2596

315

锥入度，60X，0.1 mm，ASTM D217

285

SKF Emcor 防锈测试，蒸馏水，ASTM D6138

0, 0

水冲洗，79ºC 时的损耗，wt%，ASTM D1264

6

High Performance Synthetic Grease for Wind Turbines

Protect your wind turbine bearings from extreme temperatures to boost your operation’s productivity and minimize maintenance.

Mobil SHC Grease 102 WT is specially formulated to protect pitch, yaw and generator bearings in temperatures as high as 120°C (248°F) and as low as -50° (58°F).

This extreme low-temperature synthetic grease helps wind turbines maintain peak performance, even in severe conditions, helping operations to limit maintenance costs and downtime. Through high-technology formulation, Mobil SHC Grease 102 WT can help:

Minimize bearing torque, even during low-temperature startups
Protect against fretting wear, rust and corrosion
Resist water washout

Watch a video to learn more about Mobil SHC™Grease 102 WT

Long regreasing intervals and bearing life
Outstanding performance in severe temperatures — as low as -50°C
Enhanced equipment reliability and availability, which can help boost turbine productivity
Excellent flow in central lubrication systems to ensure sufficient supply to lubrication points

Equipment lubricant recommendations

Our Mobil Serv℠ Product Selector tool will help you identify lubricant(s) for your specific equipment.

Data sheets

Features and Benefits

• The low internal friction and high natural viscosity index of the base fluids offers the potential for improved low-temperature starting and running torque and pumpability down to -50 °C (-58° F).

• Superb thermal stability and oxidation resistance compared to conventional greases helps provide extended service life with longer relubrication intervals.

• Excellent rust and corrosion protection provides excellent performance in wet conditions for reduced downtime and maintenance costs compared to/versus conventional greases.

• Outstanding structural stability in the presence of water helps retain grease consistency in hostile aqueous environments.

• Excellent pumpability provides reliable lubrication of bearings using centralized grease systems or grease dispensers.

• Low traction coefficient offers potential improved mechanical life and reduced energy costs versus conventional greases.

Applications

• Mobil SHC Grease 102 WT meets most specifications of wind turbineuilders and component suppliers and has demonstrated outstanding performance in the lubrication of yaw, pitch, and generator bearings either manual greased or using centralized grease systems or grease dispensers.

• For wind turbines operating under extreme low temperature environments.

• Recommended application temperature range for continuous operation is from -50° C (-58° F) to 120°C (248° F).

Specifications and Approvals

This product has the following approvals:
Tested and approved for material compatibility by IMO
Tested and approved for seal compatibility by ThyssenKrupp Rothe Erde

This product meets or exceeds the requirements of:
DIN 51825: 2004-06 KPHC2K-50

Properties and Specifications

Property
Grade	NLGI 2
Corrosion, Bearing, 48 h, 52 C, Rating, ASTM D1743	PASS
Dropping Point, °C, ASTM D2265	263
Four-Ball Extreme Pressure Test, Weld Load, kgf, ASTM D2596	315
Penetration, 60X, 0.1 mm, ASTM D217	285
SKF Emcor Rust Test, Distilled Water, ASTM D6138	0, 0
Water Washout, Loss @ 79 C, wt%, ASTM D1264

下一产品： Klüberquiet BQ 72-72|Klüberquiet BQ72-72