DESCRIPTION
Designed to operate in coolant systems of the Copper Cold Rolling Mills. QUAKEROL CCR 300 FDB is a “tailor-made” rolling oil, formulated to meet all the
requirements of the rolling process, whatever the copper alloys and the severity of the operations.
USAGE
QUAKEROL CCR 300 FDB is used as an emulsion in distilled water at a selected concentration, depending on the copper alloys rolled and the severity of the operations.
Its stability in distilled water as well as its oil particle size is defined according to the design of the coolant system. The selected chemicals used in the QUAKEROL CCR
300 FDB as well as respecting the minimum concentration during usage, guarantee no stains formation on copper and alloys.
BENEFITS
- Stable emulsion guaranteeing a low consumption. Excellent lubrication properties.
- Good “plate-out” assuring the oil film in the “bite”.
- Its low free fatty acids content does not generate too much copper soaps. Stain-free on pure copper and copper alloys.
- Compatible with the mechanical parts of the rolling mill. Compatible with most standard rejection processes.
- No human and ecological toxicity.
TYPICAL PROPERTIES
QUAKEROL CCR 300 FDB
Typical Physical Properties
| Properties |
Typical Type |
Units |
| Appearance |
Light Yellow |
|
| Kinematic Viscosity |
32,5 |
mm²/s, 40° C |
| Density |
0.869 |
g/cm³, 40° C |
| Saponification Value |
70 |
mg KOH/g | | 
