| Castrol Tribol™GR 00 Semi-fluid grease for centralized lubricating systemsDescriptionCastrol Tribol™GR 00 (previously called OLIT™ 00) is a semi-fluid grease for the application in centralized lubricatingsystems. It is especially suited for applications subjected to extreme conditions such as open air, humidity, dust andvibrations. OLIT 00 is approved byMercedes Benz as semi-fluid grease in centralized lubricating systems - MB. sheet 264.ApplicationCentralized lubricating systems for semi-fluid greases in the industrial and automotive sectors.Highly loaded sliding and rolling bearings.Joints, tie rod joints, flexible shafts.Temperature application range: - 35°C/- 31°F to + 100°C/+ 212°FAdvantagesHigh load carrying capacityExcellently pumpable even in long pipesLow-maintenance lubrication due to extended relubrication intervalsGood adhesionAging-resistant and shear-stableResistant to cold and hot waterOptimum protection against friction and wearExcellent corrosion protectionPage: 1/2Typical CharacteristicsName Method Units Tribol GR 00Colour Visual - YellowishBase oil - - lithium/mineral oilWorked Penetration (60 strokes @ 25°C / 77°F) ASTM D217 / ISO 2137 0.1 mm 400-430Density @ 20°C / 68°F ASTM D4052 kg/m³ 889Base Oil Viscosity @ 40°C / 104°F ASTM D445 / ISO 3104 mm²/s 145.3Dropping point ASTM D566 /ISO 2176 °C/°F 181/357.8Rust Test - EMCOR (distilled water) ASTM D6138 /ISO 11007 Rating 0Copper Corrosion (24 hrs,100°C / 212°F) ASTM D4048 Rating 0Flow pressure @ -35°C / -31°F DIN 51805 mBar 450Subject to usual manufacturing tolerances.This product was previously called Olit 00. The name was changed in 2015.Tribol™GR 0023 Jan 2015Castrol, the Castrol logo and related marks are trademarks of Castrol Limited, used under licence.This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, ismade as to its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advisedto ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products safely, to assess suitability for theintended application and to comply with all applicable laws and regulations. Safety Data Sheets are available for all our products and should be consulted forappropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by either BP plc or its subsidiaries for anydamage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from hazards inherent in the nature of thematerial. All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if yourequire any further information.Castrol Industrial, Technology Centre , Whitchurch Hill , Pangbourne , Reading , RG8 7QR , United Kingdom |
